Dual Channel AFR
in the Palm of Your Hand -
Monitor Left and Right Bank Air/Fuel
Ratios
Zeitronix Wideband Systems can be paired together
for dual channel operation. In a dual channel configuration each wideband
oxygen sensor connects to either a
Zt-2 or
Zt-3 wideband controller.
Use two Zt-2s, two Zt-3s, or one Zt-2 and one Zt-3 - expandable to up to eight
Zeitronix wideband systems. Expand using a Zt-2 Wideband adding
additional AFR/Lambda, RPM, Boost/Vacuum, EGT, air/fluid temperatures
and oil/fuel pressure readings!
Expand Your Single Channel Zeitronix Setup |
 |
|
Dual Channel Setup with Individual
Zeitronix Displays
Connect individual
Zt-2 or
Zt-3 widebands to
their own displays.
The
ZR-2 Multi Gauge and
LCD Display
each display multiple values at once. The ZR-1
AFR/Lambda display and
Hacker/Tweaker display
may also be used in these configurations.
Setup Details |
 |
|
Dual Channel Setup with a
Single
Zeitronix Display
Using a single
ZR-2 Multi Gauge or
LCD Display monitor two AFR/Lambda readouts simultaneously. A
Zt-2 Wideband
and a 2nd
Zt-2 or
Zt-3 Wideband
controller are linked together in this configuration.
Setup Details |
 |
|
Dual Channel Setup
using the
Black Box Data Logger
Using a single
Black Box Data Logger monitor two AFR/Lambda readouts simultaneously. A
Zt-2 Wideband
and a 2nd
Zt-2 or
Zt-3 Wideband
controller are linked together in this configuration. An optional
ZR-2 Multi Gauge or
LCD Display
may be used at the same time.
Setup Details |
 |
|
Dual Channel Setup with Zeitronix
Data Logger Display
Two or more (up to 8)
Zt-2s/Zt-3s can be connected to a laptop for real-time
display/data logging using the Zeitronix Data Logger software. All data from
the Zeitronix units are displayed simultaneously in real time.
Setup Details
|
 |
|
Dual Channel Setup with DashDAQ
Display
Two or more (up to 8)
Zt-2s/Zt-3s
can be connected to the
DashDAQ II XL display. The
DashDAQ can read and display wideband
and sensor readings from each Zeitronix device plus OBDII data all at
once. The DashDAQ has two additional
0-5 volt analog inputs and data logging is supported through an SD card slot on the side of the
display.
Setup Details
|
 |
Compact, High Quality Products - Made
in the USA!
Two Zeitronix wideband controllers together are considerably smaller than
most other dual-AFR wideband solutions. A pair of Zeitronix wideband
controllers can be zip-tied out of the way with minimal space required for a
clean and simple dual channel air/fuel ratio installation.
Zeitronix focuses on creating
high quality products, all made in the USA.
We offer great customer service and all-in-one wideband systems that "just
work". Contact Zeitronix today and
see the difference our systems can make for you. |
 |
