- Four K Type Thermocouple inputs.
- 8 EGT Channels. Easy expansion to eight or more inputs by changing
CAN ID in additional KT-4 units. For example, 8 EGTs using 2 KT-4s and 8 EGT
probes.
- CAN Bus
communication
for easy connection and logging through other CAN Bus devices.
- Four 0-5 V analog outputs: for
use with Dashes, ECUs, data loggers and engine
management systems.
- Optional Zeitronix KLCD Display
- Error indication in event of K signal absence
- K Type Thermocouples are required and sold
separately.
- 4 EGTs, 8 EGTs (expandable), Brake Temperature, Oil
Temperature, CHT, Transmission Temerature. Multiple options available.
here.
Installation
instructions
Zeitronix Data Logger Software
AIM XC1 files Zeitroinx CAN Bus
Devices
AEM CD-5
CD-7 files for Zeitronix CAN Bus Devices
MegaSquirt Setup
for
Zeitronix Can Bus Devices |
SEMA Awarded
KT-4 CAN Bus
The smallest K type box on the market!
Dimensions: 3" x 2" x 1"
(76mm x 50mm x 25mm) |
|
Supported CAN Bus Specifications:
User selectable CAN Bus Speed:
1Mbps, 500 Kbps, 250 Kbps, 125 Kbps
User selectable CAN Bus ID:
Standard (11 bit) and Extended (29 bit)
User selectable CAN Bus address:
Standard 0x0000 to 0x7FF
Extended 0x0000 to 0x7FFF
CAN Bus update rate:
125ms (8 Hz)
120 ohm termination- None
CAN DATA:
Data 0, 1 :
Temperature in C, 16 bit (Big Endian, Motorola)
Data 2, 3 :
Temperature in C, 16 bit (Big Endian, Motorola)
Data 4, 5 : Temperature in C, 16 bit (Big
Endian, Motorola)
Data 6, 7 :
Temperature in C, 16 bit (Big Endian, Motorola)
|
KT-4 CAN Bus Default Settings:
CAN
Bus ID Standard (11 bit)
CAN Bus ID (HEX) 0x004B
CAN Bus Update Rate 125 ms (8 Hz)
CAN Bus Speed 500 Kbps Zeitronix serial cable
(available separately) is required for other than default set up.
|
