Hardware Compatibility Questions
This page provides information on the model Year 2009 and earlier compatibility in relation to the Model 2010 Zt-2 and displays. It will also detail information on upgrade or trade-in services for the 2009 and earlier model Zt-2 and displays.
Hardware Changes:
Both the earlier model Zt-2 and the 2010 model
Zt-2s have a "User" input which allows a 0 to 5 volt sensor reading. The Zt-2 Model 2010 introduces a new configurable input
called "User2". Display of the "User2" value on the Model 2010 LCD
display can be put in place of the "Lambda" or "AFR" readings with a
customized
name for the input title. The LCD will then power up using this
layout and name. The 2010 Model
ZR-2 Multi-Gauge
can also display this data and be configured to power on with "User2" data
as the default.
The "User2" input can be configured for use as a Temperature input (air
intake, oil temperature, transmission temperature), pressure input (fuel
pressure or boost readings), or as a voltage input (0 to 5 volt readings).
These sensors can be found on our
order page.
1. Can a Model 2009/earlier Zt-2 Wideband
be upgraded to a 2010
model? Please visit the
2009 Specification Upgrade Page for more
information on this upgrade service.Two options are
available for 2009/earlier Zt-2 Wideband systems.
a. Upgrade the system to the 2009 Zt-2 specification.
2009 Zt-2 specification features include
warnings output
support for the ZAVT-1,
linear
wideband output support,
75 PSI (5
BAR) MAP sensor support, and
adjustable narrowband
switching point output support.
b. Trade in the 2009/earlier Zt-2 for a Model 2010
To provide some help
in getting the new Model 2010 Zt-2 Wideband we are offering a trade-in
service for $187 plus shipping. Please see the
trade in service details page for more
information.
2. Can a 2010 Model LCD or ZR-2 Multi-Gauge be
used with a 2009/earlier Model Zt-2?Yes, but since the 2009/earlier Zt-2
does not support a configurable "User2" input this data is not
available for the displays to show. You will be able to setup the
"User2" display and rename the text.
3. Can a 2009/earlier Model LCD Screen or ZR-2
Multi-Gauge be used with the Model 2010 Zt-2?
Yes, but the 2009/earlier displays do not support viewing "User2" data.
4. Can a Model 2009/earlier LCD or ZR-2
Multi-Gauge be upgraded to become a Model 2010 Display?
No we do not have a service upgrading
2009 and earlier displays by themselves. See question 1 for upgrading
the display as part of the upgrade or trade-in services.